periMICA Edge Computer
The periMICA Edge Computer can be configured with the following hardware modules:
Processor modules (P) , Supply modules (S), Function modules (F)
As the respective interfaces are open, customer-specific or suitable modules from third-party suppliers can also be used.
Ready-to-order configurations can be found in the tab "Ordering information".
Version: Single Core
Processor
TI AM3352 single core, Cortex A8, ARMv7, 1.00 GHz
Memory and storage
1 GB RAM, 4 GB eMM Flash
Operatingsystem
Linux-based
Mounting
DIN rail mounting kit, wall mounting kit
Diagnostic display
LEDs to indicate the operating status
Protection Class
IP67
Technical Parameters
Operating temperature
-25...+75°C
Storage temperature
-25...+85°C
Relative humidity
5...95% non-condensing
Material Properties
Housing material
Aluminum
Dimensions (W*H*D)
132*86*35mm;
Version: Dual Core
Processor
Marvell Armada 385 dual core,Cortex A9, ARMv7, 1.33 GHz
Memory and storage
2 GB RAM, 16 GB eMM Flash
Operatingsystem
Linux-based
Mounting
DIN rail mounting kit, wall mounting kit
Diagnostic display
LEDs to indicate the operating status
Protection Class
IP67
Technical Parameters
Operating temperature
-25...+75°C
Stoarfetemperature
-25...+85°C
Relative humidity
5...95% non-condensing
Material Properties
Housing material
Aluminum
Dimensions (W*H*D)
132*86*35mm;
| Alpine Container | 23-01 |
| Dashboard Container | 22-03 |
| Debian Container | 23-01 |
| Distance control Container | 22-04 |
| MQTT broker Container | 23-01 |
| Node-RED Container | 23-02 |
| periCORE debug Container | 23-01 |
| PKI2go Container | 23-03 |
| Starter Kit Plus Container Bundle | 23-02 |
| Starter Kit Plus update Container Bundle | 23-02 |
| periMICA basesystem | 23-01 |
| periMICA basesystem | 22-03 |
| periMICA basesystem | 21-02 |
Order numbers and details
| periMICA spec. 0001 | PRN.000.025-00001 | Single Core, 100Base-TX (PoE), GPIOs |
| periMICA spec. 0002 | PRN.000.025-00002 | Single Core, 100Base-TX (PoE), GPIOs, USB |
| periMICA spec. 0004 | PRN.000.025-00004 | Dual Core, 100Base-TX (PoE), GPIOs, USB |
| periMICA spec. 0005 | PRN.000.025-00005 | Dual Core, 100Base-TX (PoE), GPIOs |
| periMICA spec. 0006 | PRN.000.025-00006 | Single Core, 100Base-TX,100BASE-T1 |
| periMICA spec. 0007 | PRN.000.025-00007 | Single Core, 100Base-TX,100BASE-T1, USB |
| periMICA spec. 0008 | PRN.000.025-00008 | Dual Core, 100Base-TX,100BASE-T1 |
| periMICA spec. 0009 | PRN.000.025-00009 | Dual Core, 100Base-TX,100BASE-T1, USB |
Zubehör
| Wall mounting Kit | PRN.000.036 | Kit for mounting the periMICA on a wall |
| DIN-rail mounting Kit | PRN.000.037 | Kit for mounting the periMICA on a DIN rail |
| HARTING ix Industrial® Type A to RJ45 | 33480147826010 | HARTING Pre-assembled ix Industrial® type A to RJ45 cable (S3 only) |
| HARTING M12 Cable Assembly A-coded 12 pol st/- m/- 1,0m | 21348400C79010 | Power cable, M12 A-coded round plug connector, pre-assembled on one side, 12 cores (S1 only) |
| TP-LINK TL-PoE150S PoE Injector | TL-PoE150S | PoE-Injektor PoE-Injektor, 1 GBit/s IEEE 802.3af |